# Friday, July 28, 2006

haha this is a funny idea, proxy someones internet and just be mean. this is an example where they just flip images.

http://www.ex-parrot.com/~pete/upside-down-ternet.html

posted on Friday, July 28, 2006 1:43:52 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Sunday, July 23, 2006

I got hooked up for a vendor pass to NHRA at Pacific Raceway today, its INSANE top fuel cars are the cooles thing i have ever heard. its louder then anything you can imagine - it shakes your eyeballs. cool do it some time. i was 20 ft away from them. so cool!

posted on Sunday, July 23, 2006 10:51:54 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Saturday, July 22, 2006

Today I will be D-J'n for Dunk Hoops put on by ECHO if you got the time show up

posted on Saturday, July 22, 2006 10:47:39 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Wednesday, July 19, 2006

this is a cool site, who knows if its free for good but the idea and streaming music is rad

music genome project

posted on Wednesday, July 19, 2006 1:02:43 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [1] Trackback
# Monday, July 17, 2006
and now VM ware follows suite with free virtual PC software
posted on Monday, July 17, 2006 2:33:19 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Friday, July 14, 2006

Windows XP will do it, so will 2003 – give me 2000.

  • Run Regedit (Start Menu>Run; type in 'regedit')
  • Open HKEY_CURRENT_USER
  • Open subfolder Software
  • Open subfolder Microsoft
  • Open subfolder Command Processor
  • Double-click the key vale CompletionChar (right-hand side). Change the Value Data value to the ASCII value of the key you wish to use for command completion. Not all keys will work - the reccomended value is 9 decimal which is the <TAB> key.
  • Quit regedit
posted on Friday, July 14, 2006 10:25:50 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Thursday, July 13, 2006

Note that there are 64,000 possible combinations on a master lock (0-39 makes 40 possible values on each digit, there are 3 digits).  This is a little inaccurate since there is a little tolerance in entering a number (38 or 36 usually works for 37, for instance), but it works for showing how much we'll narrow it down.

Firstly, note that the only tumbler that you actually move when you turn the dial is the one that controls the last digit.  You will be finding the last digit first.  This is the most crucial step.  Do not mess up.  Position the lock at zero.  Pull up on the shackle (the U-shaped thing).  Turn until it clicks.

http://www.howstuffworks.com/inside-lock.htm - see the last two pictures for exactly why it clicks like this, it should be pretty clear.

Now, when it "clicks" (you will feel it), it will lock in between two numbers.  While maintaining tension on the shackle, turn the dial around.  Note where the dial stops.  Let's say that I can rotate the dial between 4 and 5.  This means that the number I want to write down is 4.5.  If it rotates between 4.5 and 5.5, the number that I want to write down is 5.  This varies widely from lock to lock - some don't have any tolerance for movement when tension is maintained, some have quite a bit.  Use your best judgment, and if you screw up, you will notice in just a second.

Do this around the entire lock.  You will hopefully get 12 numbers.  If you didn't, you screwed up and you need to do it again (you did make sure your lock was a Master lock, didn't you?).

Okay, so what are these numbers?  One of them is the last digit to your lock.  The other 11 are decoys.  How do we know which is the correct one?

Let's take this series of possible last digits (these were the ones I used with my lock):  38.5, 35.5, 32, 28.5, 25.5 22, 19, 15.5, 12, 8.5, 5.5, 2

Sometimes it is very difficult to tell if something falls on the digit or between, so there should be 7 that have a .5 and 5 that don't.

First, take away all of the ones that have a .5 after them.  They are all decoys.

So, you have 32, 22, 19, 12, and 2 left.  You will note that they all have the same digit on the one's place except one of them.  You are left with 19.  That is the last digit.

I would recommend trying this with a lock that you know the combination to first, because if you get the wrong one this time, you'll probably get it wrong later too, and you may need to try up to 100 combinations later, and it will be pretty frustrating when none of them work.

Enter modulus.  Modulus is a lesser-known mathematical operator that just means "remainder."  The magic number with Master locks is four.  You need to find the modulus of the last digit of your lock and four.  For my lock, the last digit is 19.  Let's do some long division!  4 into 19=4, and 4 times 4 is 16, and 19-16=3, so we have 4 remainder 3.  So, 19 Mod 4 (sometimes stated 19%4) is 3.  Now, you must list all 10 of the numbers with a modulus that is equal to [LastDigit Mod 4].  That means that I am left with 3, 7, 11, 15, 19, 23, 27, 31, 35, and 39.

One of those is the first digit.

The second digits are the easiest.  Just add two to the possible first digits.  That gives us 5,9,13,17,21,25,29,33,37,1 (39+2=41, but there is no 41, so begin at zero [NOT ONE] from 39).

Now, enumerate all the possible combinations:

3-1-19
3-5-19
3-9-19
3-13-19
...
7-1-19
7-9-19 <--This is the actual combination, by the way
7-13-19
... etc., etc., etc.

So now, we have narrowed down the 64,000 combinations to a mere one hundred (10*10*1).  This shouldn't take you more than 15 or 20 minutes to try all of the combinations.  On average, it takes me 10 minutes from start to finish.  Remember to mark down which combinations you've tried!

orginal site here http://www.fusor.us/lockpick.html

posted on Thursday, July 13, 2006 3:21:23 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Wednesday, July 12, 2006

i use this product daily and paid for it, now its free. go figure.

Download Virtual PC 2004

its a great tool.

posted on Wednesday, July 12, 2006 2:35:12 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Tuesday, July 11, 2006

dvdshrink is starting to have problems with new dvd’s as is decryptor

ripit4me is the new kid on the block

posted on Tuesday, July 11, 2006 9:16:05 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Monday, July 10, 2006

I had a few links i wanted to read later and just posted them here.

Tip for UDMA-6

How to Check Current Transfer Mode

  1. Open Device Manager
  2. Expand IDE ATA/ATAPI Controllers
  3. Double click on Primary IDE Controller or Secondary IDE Controller
  4. Go to the Advanced Settings tab to see the current transfer modes. If you see anything besides UltraDMA-6, and especially if you see PIO Mode, then follow the steps below.

How to Force UltraDMA-6

  1. Open up the Registry Editor.
  2. Navigate to the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}.
  3. There are several sub-keys under this one, such as 0000, 0001, etc. You are interested in two of them that say Primary IDE Channel and Secondary IDE Channel.
  4. Make the following changes to both of those keys:
    1. Delete any attributes named MasterIdDataCheckSum or SlaveIdDataCheckSum. This resets the tracking for errors that Windows uses to determine when the transfer mode should be lowered.
    2. Add an attribute with the name ResetErrorCountersOnSuccess and a DWORD value of 1. This tells Windows that it should lower the transfer mode when there are six consecutive errors instead of six cumulative errors.
    3. If they exist, set the following keys to a hexadecimal value of ffffffff (eight F's). This will change the transfer modes to UltraDMA-6:
      • MasterDeviceTimingMode
      • MasterDeviceTimingModeAllowed
      • SlaveDeviceTimingMode
      • SlaveDeviceTimingModeAllowed
      • UserMasterDeviceTimingModeAllowed
      • UserSlaveDeviceTimingModeAllowed
    4. Reboot your computer and check the devices to see if they are set to UltraDMA Mode 6.
posted on Monday, July 10, 2006 12:26:23 PM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
here is an application I love more then ubuntu, i hope it comes to reality I want to see ubuntu give msft something to worry about. competition rules.

followup - its now part of the install.
posted on Monday, July 10, 2006 11:53:24 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback
# Saturday, July 08, 2006

Congratulations are in order to Conor and Cheryl Today. They are gettin’ hitched this afternoon. Here is to a long and wonderful life kids. Cheryl, you know he stinks right?

DSC01190_600x450

Cheryl Glassey & Conor Glassey

posted on Saturday, July 08, 2006 9:05:37 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [0] Trackback

yes i did blow up my hand on the 4th here is a graphic shot of my hand. kids dont play with fireworks.

DSC02966

posted on Saturday, July 08, 2006 9:01:38 AM (Pacific Daylight Time, UTC-07:00)  #    Comments [1] Trackback